How to Build an In-Ground Trampoline DIY
Trampolines are a great way for children and adults alike to stay active and have fun. However, traditional above-ground trampolines can take up a lot of space in your backyard and may not be the most aesthetically pleasing. In-ground trampolines, on the other hand, offer a sleeker and safer option. In this article, we’ll take you through the steps of building your own in-ground trampoline DIY.
Step 1: Choose a Location
The first step in building your in-ground trampoline is choosing the right location. Look for an area in your yard that is flat and has good drainage. Avoid placing the trampoline near trees, as falling branches could damage the trampoline or injure users. Be sure to also check for any underground utilities before digging.
Step 2: Dig the Hole
Once you’ve chosen the location, it’s time to start digging the hole for the trampoline. Use a shovel or rent a small excavator to dig a hole that is slightly larger than the trampoline. The depth of the hole will depend on the size of your trampoline, but it should be at least 2-3 feet deep.
Step 3: Create a Base
After the hole has been dug, it’s time to create a base for the trampoline. Fill the bottom of the hole with a layer of gravel or sand to promote drainage. Then, use cinder blocks or retaining wall blocks to create a level base for the trampoline to sit on. Make sure the base is level and stable before proceeding.
Step 4: Install the Trampoline
Now it’s time to install the trampoline. Follow the manufacturer’s instructions to assemble the trampoline and then carefully lower it into the hole. Make sure it is level and centered in the hole. If necessary, use a spirit level to ensure that the trampoline is perfectly level.
Step 5: Secure the Trampoline
Once the trampoline is in place, it’s important to secure it to prevent it from shifting or moving. Use stakes or brackets to anchor the trampoline to the ground. This will also help to prevent the trampoline from becoming a safety hazard during high winds.
Step 6: Add the Surround
Finally, add a surround to your in-ground trampoline to improve safety and aesthetics. This can be done using landscaping materials such as mulch, rocks, or plants. Be sure to choose materials that are soft and non-slippery to minimize the risk of injury.
In conclusion, building an in-ground trampoline DIY is a fun and rewarding project that can provide years of entertainment for you and your family. Follow these steps and you’ll have a safe and attractive trampoline that will be the envy of the neighborhood.